Secondary
Master (3rd)
Secondary
Slave (4th)
Pin 1
Primary
Slave (2nd)
Primary
Master (1st)
8. Connecting IDE and Floppy Cables
9. Connecting Front Panel Cable
7. Dr. Voice
The
Dr. Voice
is a great feature of this motherboard, which can identifies what kind of
problems had occurred in the operating system. It can even clearly “
tell
” whether there is a
component issue or an installed issue, such as CPU, memory module, VGA, PCI add-on
card, FDD, HDD or keyboard by voice. The Dr. Voice provides four kinds of language
versions,
English
,
German
,
Japanese
and
Chinese
for your choosing. You can select
preferred language version by
JP15
&
JP16
jumpers. However, if you want to disable this
function, you may also set JP1 and JP2 to pin 2-3 to disable to buzzer and speaker from
making out voices respectively.
Connect 34-pin floppy cable and 40-pin, 80-wire IDE cable to floppy connector FDC and
IDE connector. Be careful of the pin1 orientation. Wrong orientation may cause system
damage.
Pin 1
ATA 33/66/100
IDE Connector
Attach the power LED, speaker, and reset switch connectors to
the corresponding pins. If you enable “Suspend Mode” item in
BIOS Setup, the ACPI & Power LED will keep flashing while the
system is in suspend mode.
Locate the power switch cable from your ATX housing. It is
2-pin female connector from the housing front panel. Plug this
connector to the soft-power switch connector marked
SPWR
.
FDD Connector
IDE 1 (Primary)
IDE 2 (Secondary)
1
SPWR
GND
ACPI LED-
GND
ACPILED
NC
NC
GND
RESET
GND
NC
NC
+5V
IDE LED
IDE LED
+5V
+5V
GND
NC
SPEAKER
1
Speaker
IDE LED
SPWR
ACPI & PWR
LED
Reset
Pin 1
6. Onboard IEEE 1394a Connector
This motherboard has an IEEE 1394a controller and three IEEE 1394 connectors
onboard. The IEEE 1394a provides data transfer rate up to 400Mb/s, while USB is just
12Mb/s. Hence, the IEEE 1394 interface can connect with the devices that needs high
data transferring performance, such as digital camera, scanner or others IEEE 1394a
devices. Please use the proper cable to connect to devices.
IEEE 1394
Connector 1
Connector 2
Connector 3
Pin 1
2 1
KEY
+12V(Fused)T
PB+
GND
TPA+
SHIED GND
+12V(Fused)
TPB-
GND
TPA-
10 9
JP15
Pin 1
JP16
Pin 1
English
(Default)
Chinese Japanese German
JP15
Pin 1
JP16
Pin 1
JP2
JP1
