manualshive.com logo in svg

AOpen 27MX1U, Руководство пользователя

Поделиться
Скачать
AOpen 27MX1U Скачать руководство пользователя страница 28

EN-18

Adjusting the System

1.

The System menu can be used to select settings such as Input, Wide 
Mode, and others.

2.

Press the MENU key to open the OSD.

3.

Using the 

/

 keys, select System from the OSD. Then navigate to the 

setting you wish to adjust.

4.

Use the 

/

 keys to select the setting.

5.

Input: Select the source from an available input source.

6.

Auto Source: Automatically searches for available input sources.

7.

DP Format: You can select which DP format you are using. The default is 
set at DP1.2.

8.

Hot Key Assignment: Select the function of Hot Key 1 or Hot Key 2.

9.

Wide Mode: You can select which screen aspect you are using. The 
options are Full and Aspect.

10. DDC/CI: Allows the monitor settings to be set through the software on 

the PC.

11. HDMI Black Level: You can select the level of blackness under HDMI 

source. The options are Normal and Low.

12. Quick Start Mode: Enable monitor rapidly.

Note: DDC/CI, short for Display Data Channel/Command Interface, 
which allows monitor controls to be sent via software.

Содержание 27MX1U

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды