manualshive.com logo in svg

AOpen 27MX1U, Руководство пользователя

Поделиться
Скачать
AOpen 27MX1U Скачать руководство пользователя страница 26

EN-16

Adjusting the Gaming

1.

Press the MENU key to open the OSD.

2.

Using the 

/

 keys, select Gaming from the OSD. Then navigate to the 

setting you wish to adjust.

3.

Use the 

/

 keys to select setting.

4.

Over Drive: Select Off, Normal, or Extreme.

5.

FreeSync: Select On or Off. FreeSync is available for AMD supported 
graphic cards only.

6.

TVR: When turned On, TVR provides a sharper and clearer dynamic 
picture; the default is Off.

7.

Aim point: Show an Aim point on the screen for shooting games.

Note: 
 1. If FreeSync is “ON”, then the Over Drive selection is set to 

“Normal” automatically

 2. If FreeSync is “OFF”, then the user can set Over Drive to either 

one of the three settings including: (a) Extreme (b) Normal (c) Off

• 

TVR does not support PIP/PBP Mode and HDR Mode. (Selective 

models)

• 

When TVR is On, FreeSync is automatically turned off.

• 

TVR will affect the brightness of the following: Logo, Aim Point, 

Message and Input Icon.

• 

TVR feature is dependent on the monitor’s maximum refresh 

rate. For monitors supporting up to 75 Hz, TVR is available 

when the refresh rate is set to 75 Hz only.

Содержание 27MX1U

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды