4
Do not shake the device. Avoid brute force when installing or operating the device.
Please don
’
t project the beam onto combustible substances. The minimum distance
between light-output from the projector and the illuminated surface must be more
than 10 meter.
Operate the device only after having familiarized with its functions. Do not permit
operation by persons not qualified for operating the device. Most damages are the
result of unprofessional operation.
Please use the original packaging if the device is to be transported.
For safety reasons, please be aware that all modifications on the device are
forbidden. If this device will be operated in any way different to the one described in
this manual, the product may suffer damages and the guarantee becomes void.
Furthermore, any other operation may lead to short-circuit, burns, electric shock,
lamp explosion, crash, etc.
SAFETY INSTRUCTIONS
This device has left the factory in perfect condition. In order to maintain this condition
and to ensure a safe operation, it is absolutely necessary for the user to follow the
safety instructions and warning notes written in this user manual.
1. Always mount this unit in safe and stable matter.
The qualified professionals are allowed to carry out the lamp installation, operation
and maintenance, but they must guarantee to operate in strict accordance with the
instructions referred to.
2. Using lamp, the change rate of power voltage should be within
±
10%, if the voltage is
too high, it will shorten the light’s life; if it’s not enough, the lamp will be dark.
3. Please restart it after turning off light for 20 minutes until full-cooling. Frequent
switching will reduce the life span of lamps and bulbs; intermittent using will improve
the life of bulbs and lamps.
▲
Important:
Damages caused by the disregard of this user manual are not subject to
warranty. The dealer will not accept liability for any resulting defects or
problems.
If the device has been exposed to temperature changes due to environmental
changes, do not switch it on immediately. The arising condensation could damage
the device. Leave the device switched off until it has reached room temperatures.
This device falls under protection-class
Ⅰ
. Therefore it is essential that the device be
earthed.
The electric connection must carry out by qualified person.
CAUTION!
Be careful with your operations. With a dangerous voltage you can
suffer a dangerous electric shock when touching wires!
