10
--(Advance)
--(Partial Fixture Hours)
--(Total Lamp Hours)
--(Partial Lamp Hours)
Manual programme operating instructions
Homepage
→
Setting(Press ‘OK’)
→
Programme(Press ‘OK’)
→
Program selection(1-6,press ‘OK’)
→
Manual
programme(Press ‘OK’ last for few seconds and choose operating buttons, saving and increasing for next step,
saved via ‘OK’, keep pressing ‘OK’ last for few seconds and operating by channel values, max. 20 scenes for each
manual programme)
Level 1 menu
Level 2 menu
Level 3 menu
SETTING
PROGRAMME
PROGRAM SELECTION
Select a program and enter, interface as bellow:
Manual Programme
Total Time
000
Cf Time
000
1.Color
000
2.Shutter/Strobe
000
Delete Step
Save Add
Previous
00/00
Next
Save
Back
Up
Down
OK
1.
Total 6 programs, max.20 scenes for each programme
2.
In programme interface, channels above, operating buttons down.
Total Time: Total time of this scene, the number is bigger, then the speed is slower, no time unit
Cf Time: The time of schedule step in this scene, the number is bigger, then the speed is slower, no time
unit
3.
Press ”OK” last for few seconds can be an operating button and also can be a channel value amending button
4.“Delete Step”: Delete the channel which display right now
5.“Save Add”: Increasing a new step to save the display channel
6.“Previous”: Checking previous step value and display with channel
7.“01/2”: Display scenes of manual program and current schedule steps
8.“Next”: Checking next step and display with channel
9.“Save”: Saving current display channel
10.Saved and quit, you can choose program 1-6 under running mode
