AOC LE32W354F, Руководство по техническому обслуживанию

Страница: 16 / 32

MSD6306 software upgrades (After Service)
1
、
Software upgrade tools and materials
u
Personal computer
（ WI NDOWS XP syst em, USB2. 0 ）
u
AC100~240V power suppl y and power cor d
u
I SP
burning
boar d and connect i ng l i ne
u
USB flash disk
（
2.0 version
，
Capacity not more than 2G
）
2
、
Preparatory work before the upgrade
Recorded all the ADC and the white balance data of all the message source in factory menu before
upgrade(FLASH initialization may occur after the upgrade, flush color calibration data, then restore the data you
have been recorded):
1. In the condition of YPbPb message source, press the MENU button after appear the main menu, then
followed by 8202 number keys to enter the factory menu, select ADC ADJUST item, press the OK key to
enter the next level menu, move the cursor to the MODE item, press the left / right Moving button and
move the cursor selection in YPbPr (SD)item, record the R-GAIN/G-GAIN/B-GAIN value and
R-OFFSET/G-OFFSET/B-OFFSET value.
2.
In the ADC ADJUST item, press OK key to enter the next level menu, move the cursor to the MODE item,
press the left / right cursor keys to select YPbPr (HD) item, record R-GAIN/G-GAIN/B-GAIN value and
R-OFFSET/G-OFFSET/B-OFFSET value.
3. Operations and procedure of software upgrading:
3.1. Changed the file name to "MERGE.bin", then stored software in the FAT32 format blank U disk.
3.2. Insert USB flash disk into the USB upgrade port, upgrade the software according to the following the operating
instructions:
Select AIR or TV signal source, press Menu key to pop up the main menu, then choose.
Select Software Update(USB), press right key or OK key to enter.
Record the R/G/B-GAIN and R/B/G-OFFSET value under the
YPbPr(SD) and YPbPr(HD) mode, to be replaced the recorded value
after the machine software upgrade
YPbPr(HD)