7
Network
7.1
Network and Internet
Home network
To enjoy the full capabilities of your TV, your TV must be
connected to the Internet.
Connect the TV to a home network with a high-speed Internet
connection. You can connect your TV wirelessly or wired to
your network router.
Connect to network
Wireless connection
What you need
To connect the TV to the Internet wirelessly, you need a Wi-Fi
router with a connection to the Internet.
Use a high-speed (broadband) Internet connection.
Make the connection
To make a wireless connection…
Step 1
- Make sure that your wireless network router is
switched on.
Step 2
- Press the
Settings
key, select
Network
and press
(right) to enter the menu.
Step 3
- Select
Connect to network
>
Start now
and press
OK
.
Step 4
- Select
Connect
and press
OK
.
Step 5
- Select
Wireless
and press
OK
.
Step 6
- Select
Scan
to scan for your wireless network. If you
have a router with WPS (Wi-Fi Protected Setup), you can select
WPS
. Select your choice and press
OK
.
•
Scan
Select
Scan
to scan for your wireless network (your wireless
router). The TV might find several wireless networks in your
proximity.
•
WPS
If your router has WPS, you can directly connect to the router
without scanning. Go to the router, press the WPS button and
return to the TV within 2 minutes. Then press
Connect
to make
the connection.
If you have devices in your wireless network that use the WEP
security encryption system, you cannot use WPS.
If you must use the
WPS PIN code
to connect, select
Scan
instead of WPS.
Step 7
- From the list of networks found, select your wireless
network and press
OK
.
If your network is not in the list because the network name is
hidden (you turned off the SSID broadcast of the router), select
Manual entry
to enter the network name yourself.
Step 8
- Depending on the type of router, you can now enter
your encryption key (WEP, WPA or WPA2). If you have
entered the encryption key for this network before, you can
select
Next
to make the connection immediately.
If your router supports WPS or WPS PIN, you select
WPS
,
WPS PIN
or
Standard
. Select your choice and press
OK
.
•
Standard
Select
Standard
to enter the encryption key (password,
passphrase, or security key) manually. You can use the keyboard
on the remote control to enter the encryption key. Once you
have entered the key, press
Connect
.
•
WPS PIN
To make a secured WPS connection with a PIN code, select
WPS PIN
and press
OK
. Write down the 8-digit PIN code
shown and enter it in the router software on your PC. Return to
the TV and press
Connect
. Consult the router manual on where
to enter the PIN code in the router software.
Step 9
- A message will be shown when the connection is
successful.
Problems
Wireless network not found or distorted
• Microwave ovens, DECT phones or other Wi-Fi 802.11b/g/n
devices in your proximity might disturb the wireless network.
• Make sure that the firewalls in your network allow access to
the TV's wireless connection.
• If the wireless network does not work properly in your home,
try the wired network installation.
Internet does not work
• If the connection to the router is OK, check the router
connection to the Internet.
The PC and Internet connection are slow
• Look in your wireless router's user manual for information on
indoor range, transfer rate and other factors of signal quality.
• Use a high-speed (broadband) Internet connection for your
router.
DHCP
19
Содержание LE32S5970
Страница 9: ...9...
