Aobosi JC-145B, Инструкция по эксплуатации

Страница: 6 / 13

6
Red Wines
15-18ºC / 59-64.4
℉
Dry/White Wines
9-14ºC / 48.2-57.2 ℉
Rose Wines
10-11ºC / 50-51.8 ℉
Sparkling Wines
5-8ºC / 41-46.4 ℉
OPERATING YOUR WINE CELLAR AND SETTING THE TEMPERATURE
CONTROL
FOR JC-85B/JC-145B WINE CELLAR

Control System Instruction

Power switch : After the unit is power on, press for 3 seconds to turn on or off
the unit.

Touch the button ,you can interchange the Fahrenheit ( ℉ ) and Celsius ( ℃ ) display

Temperature setting button : Press before adjust temperature. When press it
first time, the display flashes and shows the setting temperature. After 5 seconds it shows
the measured interior temperature. Press
to increase the setting temperature and
press to decrease the setting temperature.

Display window: 2-digit LED display for each to show setting temperature or actual interior
temperature.

Light button : Press
to turn on or off. When open door, the light will be switched on
automatically, and when close the door, the light will turn off automatically. To keep the light
stay on for 10 mins, please turn the light off first after opening the door and then turn the light
on.

Lock screen function : If there is no any operation with digital control for 3 minutes, it will be
locked automatically. Press and at the same time for 3 seconds to unlock.

Setting The Temperature Controls

When press the temperature setting button, the system will enter the set up mode of the
upper or lower compartment automatically. The LED display will flash and show the setting
temperature. After 5 seconds the flash will stop and it will show the actual measured
interior temperature.

Press the button “+” or ”-” once, the temperature will decrease or increase 1
℃
./33.8 ℉
After stopping pressing the button for 5 seconds, LED figure will stop flash, then revert
back to display the setting temperature of the upper or lower compartment.

After the unit is unplugged, the system will return to default setting temperature, which set
by factory. The default setting temperature as below: