wall
wall jamb
3/16"
3/16"
threshold
OUTSIDE
D
Fig 1
wall
[
02
]
[
02
]
Wall Bracket [18]
must be
mounted
to the stud.
7
panel
Wall Jamb [02]
so that it can be
mounted to
the stud.
[02]
or measure in 3/16" + (A") if you want to install the shower door behind the outside of the
wall (Fig 1, Fig 2). A" is the distance between outermost surface of shower door and the
outside of the wall.
ATTENTION
.
To avoid personal injury or property damage, identify components and read all instructions
before installing.
This model requires a minimum 2-3/16" (55mm) of flat level threshold space for installation.
(Dimension "D" of Fig 2.)
The instructions below are for
installing the fixed panel on the right. To install the fixed panel
on the left, transpose all instructions.
Step 1
This shower door must be
mounted to
a stud. Minimum threshold space is required.
IMPORTANT:
Using a stud finder, ensure the wall intended to hold the door has a stud at the
installation point. A stud in this location must be identified to support the support bar and the
wall jamb in order to proceed with the installation. If there is no stud in the shown area,
we recommend employing a qualified contractor to install one. (Fig 2)
1. Measure in 3/16" (5mm)
minimum
from the outside of the wall to the pro
file of the
Wall Jamb
2. Use a pencil and stud finder to mark the location of all three screw holes for fixed
.
INSTALLATION INSTRUCTIONS
.
.
Fig 2
