Step 19
1. If needed, the door height at each wheel can be individually adjusted by using the
Wrench
[21]
.
a. For the
Trolley Wheel [12]
,
use a
Wrench
[21]
to carefully
loosen
the nut
half a
turn.
Rotate plastic nut as shown in Fig 20.1. This will raise or lower the
Door Panel [09]
at this
location so that the door panel can match the wall better. Fasten the nut again after the
adjustment.
b.For the
Wheel Guard
[14]
,
use the
Wrench
[21]
to hold the nut and
use
the
Allen Key 2mm
[23]
to
loosen
the nut
half a
turn. Rotate plastic nut as shown in Fig 20.2. This will adjust the
Wheel Guard
[14]
to
fi
t the groove of the
Support Bar [03]
better.
Fasten the nut again after
the adjustment.
2. Install the covers of the
Trolley Wheel [12]
(Fig 20.3).
1
plastic
nut
nut
2
2a
22
see from the inside
Fig 20
see from the inside
3
