Anztec QC-7610Q, Инструкция по эксплуатации

Страница: 33 / 36

QC-7610Q Rev 1.0 Page 33
Press the retaining fins on the end of the paper roll holder together and remove the paper retainer disc.
There is a slot in the disc that needs to align with the retaining fins on the roll holder to enable the
retainer to be removed.
Place your new roll of paper on the roll holder.
Press the paper retainer back onto the shaft by lining up the location slot and depressing the retaining
clips.
Turn the machine power on.
Gently feed the paper into the printer, yellow arrows indicate the feed path. The auto feed mechanism
will grab the paper and feed it through.
Once the paper is feed a small section of receipt should come out the front of the printer and be
partially cut, remove this piece before pushing the printer back into its normal position.
Slide the printer frame back into its normal position and secure with the locking screw.