Specifications
2-5
2.5 Attaching to/detaching from DIN rail
Please install this device to the DIN rail before use.
Vertical installation
1. DIN rail attachment procedure
Hook spring pin A on the lower part of the bottom face to a DIN rail.
Fit the device into the DIN rail while pressing this device upward from underneath.
2. DIN rail detachment procedure
Pull the upper side of this device toward you while pressing upward from below, and remove from the
DIN rail.
Do not install in the reverse direction (with A on the bottom side).
This device may become detached from the DIN rail due to vibration and similar causes.
CAUTION
!
DIN rail
A
