USAGE
6. Close the tab and you are ready to go!
E. In the bottom right, press the “Change” button.
F. Select “Apply” to the question on the bar at the top that says
“Configuration contains changes. Apply these changes?”
1. If you have forgotten your password, follow the instructions in the factory reset
section of this manual. Before doing so, you may try the default password to verify
if you did not change the password earlier.
Default username: ubnt
Default password: ubnt
2. If you have not forgotten your password and need to change it,
A. Go to the “System” tab.
B. Under “System Accounts” section, change the Administrator username
(if required)
C. Press the key shaped button to reveal fields to enter current and
new password.
D. Make the required changes.
B: Changing The Password:
WIFI-1 / WebWhip
™
Wi-Fi Receiver Kit
Page 7
Page 8
WIFI-1 / WebWhip
™
Wi-Fi Receiver Kit
WIFI-1 / WebWhip
™
Wi-Fi Receiver Kit
Page 9