ACT-5X Exciter User Manual
Version 3.0 05/07/2015
Page 7 of 26
1PPS (input)
Connector:
BNC female
Impedance:
50 Ω
Level:
3.3 V-TTL
Input trigger:
Positive Transition
Location:
Back Panel
TS_IN_1/ TS_IN_2
Connector:
BNC female
Impedance:
75 Ω
Level:
See Table 1
Location:
Back Panel
TS_OUT_1/ TS_OUT_2
Connector:
BNC female
Impedance:
75 Ω
Location:
Back Panel
TUNER_IN
Input level range:
-80 dBm ~ - 15 dBm
Input connector:
N-Type female, 50 Ω
Table 1 ASI Input Specifications
No
Content
Unit
Value
1
Input Level
mv
200
2
Positive Transition (20%~80%)
ps
1200
3
Negative Transition (20%~80%)
ps
1200
4
Deterministic Jitter
%
10
5
Random Jitter
%
8
Note
1)
The electrical interface characteristics are measured under normal conditions. Values may vary.
2)
Operating in abnormal conditions may result in damage to the equipment. Long operating hours in
severe environments may reduce the reliability of the entire system, which may cause permanent
damage to equipment. Make sure all electrical interface characteristics and environmental parameters
are within the defined range listed above before operating this equipment.