ACT-5X Exciter User Manual
Version 3.0 05/07/2015
Page 4 of 26
1 Product Appearance
1.1 Front Panel
LCD:
40×2 LCD with power saving backlight
6 Buttons :
Left, Right, Up, Down, OK, ESC
6 LEDs:
When in Exciter mode:
LED_TS1:
Green light on indicates TS1 is selected and the input TS signal is OK
LED_TS2:
Green light on indicates TS2 is selected and the input TS signal is OK
LED_TSErr: Red light on indicates the selected input signal has error (Refer to Chapter 5)
When in Translator mode:
LED_ TS1:
Green light on indicates the synchronization of input RF signal is OK
LED_TS2:
Green light on indicates the equalization of input RF signal is OK
LED_TSErr: Red light on indicates there is synchronization error or equalization error
In both Exciter and Translator mode:
LED_ GPS:
Green light on indicates GPS connected and locked
LED_ RFON: Green light on indicates system ready and RF on
LED_ SysErr: A flashing red LED indicates the presence of a system error (Refer to Chapter 5)
A solid red LED indicates the unit is in "Local (LCL)" control mode, and when this
LED is off, this indicates that the unit is in "Remote (RMT)" control mode
1 BNC connector:
RFMON:
Reserved
