AnyTone THE OBLITERATOR OBLTR-8R, Руководство пользователя

Страница: 66 / 84

56
To set up a contact list find it under “Communication Note” – and set the values for the ID and a.
corresponding name. It will show the other party’s name when they use ANI or Special Call PTTID.
Example: You could set up “35356” as “Andy”.
ADVANCED FUNCTION OPERATIONS
Data transmission: You can setup 5TONE Messages to be sent by your 5TONE Encode Function. You 5.
need to pre-set up the receiver (by ID or Group) and the message to be sent – so you can access it
from 5TONE encode menu (NO.04(OBLTR-8R)/NO.05(TERMN-8R)).
Emergency alarm: It will turn on alarm function after transceiver receive matching encode
6.
ANI: It is show the other party’s ID if your transceiver receive ANI call. It will also display the caller’s 7.
name when you have the caller’s name set up in programming software.
The transceiver can program and save 100 groups of 5Tone encode,. 8.
NOTE:When you use 5Tone, the receiver and sender must use same encode method. (Selectable by software)
Such as: The sender use ZVEl1, the receiver must use ZVEl1.
NOTE:Radios must be set up to 'Decode' optional signaling (5TONE), otherwise they will ignore the 5TONE
tones being received. The 5TONE self ID has to be 5 digits and you should avoid repeating 'characters' when
setting your self ID. If you do repeat characters, the repeated character will be replaced by "E". Example:
If your ID is '21125' - it will actually be '21E25'.
Remote Wake: Set the 5TONE wake code by programming software, the only way to bring a radio c.
out of `Remote Kill' or `Remote Stun' is by receiving the 5TONE wake code.