18
8
Default: ON
ON:
Turn on reverse function
OFF:
Turn off reverse function
Enter No.10 function menu , the LCD displays
"TALK:OF".
This function enable direct communication
with other radios in case the repeater is not
activated or when out of the repeater range.
The transceiver will transmit by RX frequency
with its CTCSS/DCS signaling.
Default: off
ON:
Turn on talk around function
OFF:
Turn off talk around function
Enter No.12 function menu , the LCD displays
“SQL:03”
.
Enter No.13 function menu , the LCD displays
"DSP:CH”.
This radio has 3 different dispaly modes:
FrChannel mode. Channel mode,
Name Tag mode.
FR
: FrChannel mode
CH
: Channel mode
NM
: Name Tag mode(Amateur
transceiver mode),if channel not named,it
displays FrChannel mode.
Default: FR
Enter No.14 function menu , the LCD displays
"APO: OFF"
.
Once APO is activated, the radio will be automatically switched off when
the pre-set timer is running to end.
Enter No.11 function menu , the LCD displays
"STP:12.5".
This function valid only in frequency (VFO) mode, input frequency or
frequency scanning all restricted by frequency
step size.
Total 9 Channel step size available: 2.5K,5K,
6.25K,10K,12.5K,20K,25K, 30K and 50K.
VHF Default: 12.5K
UHF Default: 25K
TALK AROUND
SQUELCH LEVEL SETUP
Display mode setup
APO SETUP
FREQUENCY STEP SIE SETUP
This function is auto-hidden in channel mode.
If the transceiver has set at higher squelch level,it may fail to
hear the calling. If set at lower squelch level,the radio will be
interfered.
Function Menu
This function use for setting RX signal strength, the calling will
be heard only when reach setted level,
otherwise the radio will keep mute.
Default: 03
OFF-09:
Total 10 levels OFF is lowest
value(Open)
