AnyTone AT-588, Руководство пользователя

Страница: 39 / 43

34
13
AT-588
DCS encode
and decode
.
VFO frequency 145.00MHz DCS code 023N
Memory channel
1.2::! .
Output power HI
Offset direction
.!!!!!!!!!!!!!!
Key-lock setting OFF
Offset frequency 600KHz TOT OFF
Channel step 12.5KHz APO OFF
CTCSS encode and decode
.!!!!!!!!!!!!!
Squelch Level 4
CTCSS frequency 88.5Hz
Default Setting after Resetting(VHF)
AT-588
DCS encode
and decode
.
VFO frequency 435.00MHz DCS code 023N
Memory channel
1.2:: .
Output power HI
Offset direction
.!!!!!!!!!
Key-lock setting OFF
Offset frequency 5MHz
!!!!!!!!!!!!!
TOT OFF
Channel step 25KHz APO OFF
CTCSS encode and
decode
.
Squelch Level 4
CTCSS tone frequency 88.5Hz
!!!!!!!!!!!!!
Default Setting after Resetting(UHF)
Trouble Shooting
Problem Possible Causes and Potential Solutions
D Power is on, nothing
appears on Display.
+ a n d - p o l a r i t i e s o f p o w e r c o n n e c t i o n
are reversed. Connect red lead to plus
terminal and black lead to minus terminal of
DC power supply.
E Fuse is blown.
Check and solve problem resulting in blown
fuse and replace fuse with new fuse.
F
Display is too dim.
Dimmer setting is "LAMP-L". Please make the
dimmer setting "LAMP-H".
G No sound comes from
speaker.
‡6TXHOFKLVPXWHG'HFUHDVHVTXHOFKOHYHO
‡7RQHRU
CTCSS/DCS squelch is active. Turn
CTCSS or DCS squelch off.
H Key and Dial do not
function.
Key-lock function is activated. Cancel Key-lock
function.
L Rotating Dial will not
change memory channel.
Transceiver is in CALL mode. Press the VFO
or memory mode.
J PTT key is pressed but
transmission does not occur.
‡ 0LFURSKRQH FRQQHFWLRQ LV SRRU &RQQHFW
microphone properly.
‡$QWHQQDFRQQHFWLRQLVSRRU&RQQHFWDQWHQQD
properly.
Maintenance