AnyTone AT-518Plus, Инструкция по эксплуатации

Страница: 29 / 35

Professional
FM Transceiver
21
Expand Frequency
Eliminating Tail without signaling
Users can set the expand frequency via programming software, the range of expand frequency is
400~520MHz.
When transceiver without CTCSS/DCS, choose this option and write into transceiver to eliminate tail
voice.
Resume Factory Default
Once transceiver works abnormally for wrong operations or wrong programming, users can start this
function to resume all functions and channels as Factory Default.
Under power off state, press [PTT] and [PF1] key same time to switch on transceiver. Holding the
two keys till hear " click" beep to release the two keys, the transceiver will resume factory default.
ADVANCED OPERATIONS
Maintaining and Cleaning
Cover the jack with its opercula when the transceiver is not in use. After long-time use of the
transceiver, keys, control buttons and housing would become dirty. Then, neutral detergent (no
corrosive chemical agent) and wet cloth can be used to clean them.
NOTE: The receiver and transmitter must choose this function so that it can eliminate the end voice
effective