AnyTone AT-518Plus, Инструкция по эксплуатации

Страница: 27 / 35

Professional
FM Transceiver
19
Users can set Busy Channel Lockout mode by programming software.
Repeater: 1. Repeat lockout, transmitting is inhibited when current channel receives a matched
carrier but with different CTCSS/DCS.
Carrier wave: 2. Carrier busy lockout, transmitting is inhibited when current channel receives a
matched carrier wave.
Close 3. : BCL disabled, you can do transmission under whatever receiving state.
Time-out Timer
The purpose of the Time-out Timer is to prevent any caller from using a channel for an extender
period of time. If you continuously transmit for a period of time that exceeds the programmed time
set in advance, the transceiver will stop transmitting with voice prompt.
Users can set TOT timer by programming software.
Time-Out Timer Pre-Alarm
The Time-Out Timer Pre-Alarm is to alarm users that overtime transmission is going to happen.
Users can program desired TOT Pre-Alarm time by programming software.
ADVANCED OPERATIONS
Busy Channel Lockout
When BCL function is enabled, you can not transmit in busy channel. BCL prevents you from
interfering with other parties who is using the same frequency point that you select. Under this
condition, if you press the [PTT] to transmit, the transceiver will emit beep prompt and return to
receiving mode.