AnyTone AT-318UV, Инструкция по эксплуатации

Страница: 25 / 36

18
TX Power selection
Under standby state, press key, the top left corner of LCD displays " "
icon, then press key to choose High/Low power for current arrow directed
channel.
1. When LCD displays "
L " icon, it means low power is chose.
2. When LCD displays " H " icon, it means high power is chose.
BASIC OPERATIONS
DTMF code Transmit and Enquiry
1. Press key, the top left corner of LCD displays " " icon, then press key, LCD displays DTMF
data and group number (total 16 groups) of current group.
2. Press / to choose desired group and DTMF data, press [PTT] key to
transmit selected DTMF signaling. If current group not edit DTMF data, LCD
displays the current group number and "
EMPTY
".
to set arrow directed channel as frequency reverse, repeat above operation to turn
off frequency reverse.
1. When LCD displays "
R " icon, it means current arrow directed channel open the
frequency reverse function, the TX frequency and RX frequency is interchanged,
if CTCSS/DCS signaling is set, it will also interchange.
2. When " R " icon disappears, it means reverse function is close.