AnyTone AT-318UV, Инструкция по эксплуатации

Страница: 11 / 36

04
How to Charge
1.Plug the AC adaptor into the AC outlet(100V-240V), then plug
the cable of AC adaptor into the DC jack, the indicator lights
GREEN---waits to charge.
2.Slide the battery or transceiver with battery into the charger;
make sure the battery terminals are in contact with the charging
terminals well. LED turns into twinkling RED---charging.
3.It takes about 4 hours to fully charge the battery.
BATTERY INFORMATION
WARNING:
When keys or ornamental chains and other electric metals contact with the battery terminals, the battery
may cause damage or hurt bodies. If the battery terminal short circuit, it will generate a lot of heat, please
be careful when you bring or use the battery, please put battery or radio into insulated container. Do not put
it into metal container.
Do not recharge the battery if it is already fully charged. This may shorten the life of the battery or
▲
damage the battery.
Do not charge the battery or transceiver if it is damp. Dry it before charging to avoid danger.
▲