ANYTEC 750 SPD CLASSIC, Руководство пользователя

Страница: 83 / 90

6. MAINTENANCE __PAGE 75
6.3.2 Cushions
Saltwater, salt residue, dirt, ultra-violet rays, etc., take their toll on vinyl and nylon
products causing them to lose their lustre and texture. To clean, remove ordinary dirt
and smudges with a mild soap and water solution. Rinse the cleaned area with freshwater
and dry with a clean, soft, lint-free cloth or towel.
Your cushions are not waterproof. They are made up of open-cell foam, which absorbs
and holds the water. Do not leave the cushions in standing water or exposed to heavy,
prolonged rain. If, in the event, your cushions become waterlogged, remove the foam
from the cushion, press as much water as you can from the foam and allow to air dry.
To prevent mildew, keep the vinyl dry and make sure that moisture does not accumulate
between the cushions when stored. Do not store until they are completely dry.
6.3.3 Canopy
Canopy fabric
Chafing, fibre wear from dirt and grit and deterioration from ultraviolet light can cause
your canopy to degrade over time. The fabric should be cleaned regularly before
substances such as dirt, pollen, etc., are allowed to accumulate on and become
embedded in the fabric. The canopy can be cleaned without being removed from the
installation.
After each use, especially if used in saltwater areas, rinse the canopy completely with
freshwater (cold water if available). On a regular basis, brush off any loose dirt, pollen,
etc., and hose down with water, and then clean with a mild solution of natural soap in
lukewarm water (maximum 38°C). Only use soft sponges and brushes. Allow the canopy
to soak; however, do not let the soap dry. Let the canopy dry completely. Do not store
any of the pieces while wet. In most environments, a thorough cleaning and fabric
treatment is needed for every two to four years. The canopy is then removed and sent
to a company specialised in canopy cleaning and restoring work.
Chemical treatments of the fabric can improve the resistance to ultraviolet light and
water. Consult your Anytec dealer or canopy experts for advice. Be careful to not treat
canopy windows with such chemicals.
Zippers & hardware
Lubricate zippers and fasteners periodically with a clear silicone-based zipper lubricant, at
least every season. In the absence of silicone lubricants, a wax candle can be used to
lubricate the zipper track. Replace any missing fasteners or any fasteners showing signs of
corrosion. Keeping the zipper lubricated is an easy way to extend the lifetime and ease
the canopy operation.
Canopy windows
Rinse vinyl windows thoroughly with clean water to remove any dust, dirt particles,
saltwater or environmental agents. This should be done frequently to avoid build-up of
saltwater, dirt and other environmental contaminants. After a rinse, use a soft non-