11
a)
CVBS
–The CVBS cable is a single cable with a video connector (usually
yellow). You will also need to attach two audio connectors (for L-R speakers,
usually red and white). The CVBS cable may come as a single cable with the
3 connectors at each end. Attach the other ends to your TV.
Note:
The connections you use between input and output do not have to be the
same. In other words, if you are using an HDMI cable for input, you can use
YPbPr for output.
Step 3: Connect the USB Storage Device to the
AnyHD Recorder
Connect your portable USB storage device to
the USB port of the AnyHD Recorder. The
AnyHD Recorder supports the FAT32 file
system format only. You must confirm that your
USB storage device is FAT32 compliant.
If you are unsure about FAT32, simply use an
empty or new USB storage device and format it
(ALL DATA WILL BE ERASED) using the USB
utility in the AnyHD Recorder’s OSD (On Screen
Display) menu (explained later).
Note
: You must always plug in the USB storage device before turning on the
AnyHD Recorder. Also, you should power down the AnyHD Recorder before
detaching the USB device.
Step 4: Connect the power cable to the Recorder
Connect the DC power cable of the power adaptor to the AnyHD Recorder.
Connect the power adaptor to a wall socket with the appropriate voltage.
Step 5: Power on TV set and Video Player
Power on your TV set and Video Player in any order. Place a video disc
into your player and begin playing video.