Installation
7 (18)
3.2
LED Indicators
Fig. 5
Front view
LED
Indication
Meaning
GW Status
Gateway status, see Anybus X-gateway User Manual
LINK/ACT
Green
Link OK
Green, flickering
Transmitting/receiving data
Off
Link not detected or no power
NS
Off
Offline
- No power- No connection with IO Controller
Green
Online (RUN)
- Connection with IO Controller established
Green, 1 flash
Online (STOP)
- Connection with IO Controller established
- IO Controller in STOP state or IO data bad
- RT synchronization not finished
Green, blinking
Node identification (see manual)
Red
Fatal error
Red, 1 flash
Station name error
Red, 2 flashes
IP address error
Red, 3 flashes
Configuration error
Alternating Red/Green
Firmware update in progress
MS
Off
No power or initializing
Green
Normal operation
Green, 1 flash
Diagnostic event present
Red
Fatal error
Alternating Red/Green
Firmware update in progress
Top-mounted
GW Status
Bottom-mounted
NS
MS
LINK/ACT1 (X1.1)
LINK/ACT2 (X1.2)
GW Status
NS
MS
LINK/ACT1 (X2.1)
LINK/ACT2 (X2.2)
Anybus
®
X-gateway
™
PROFINET
®
IRT (2.32) Interface Network Guide
SCM-1202-028-EN 1.1