Anviz DAC844 Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 50

Anviz DAC844 Скачать руководство пользователя страница 34

AIM-DAC System

34

Anviz Global Inc

First Card Status

: It is door’s target state after verify the first card.

End Time

: It is also a time point. At End Time point verify the first card the door will change

the status again.

End Status

: It is door’s target state after verify the first card at End Time point.

Select first cards in the User area

Left side of the “User area” list out all users registered in the AIM-DAC system.
Click “ “ put all users to right side.
Click “ “ put single user to right side.
The selected users will list in right side of the “User area”.

Click “ “ to put all users back to left side.

Click “ “ to put single user back to left side.

Note:

The time before this time point to verify the first card. The door cannot change

the status. And the door must verify the first card to change status when the time over
this time point.

Note:

The time before End Time point to verify the first card. The door cannot change

the status. And the door must verify the first card to change status when the time over
End time point.

«
...
32
33
34
35
36
...
»

Содержание DAC844



















































Отзывы:

Нет отзывов