Anviz DAC844 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 50

Anviz DAC844 Скачать руководство пользователя страница 19

AIM-DAC System

19

Anviz Global Inc

verify more than one card to pass access. The “ “is the valid time gap between two cards
verify on the DAC844. (Default is 10 second)

Anti-Passback

: enable Anti-Passback rules can be applied to each access area to prevent one

user's card or entry code from being used for two subsequent entries, and to prevent a second
entry without a previous exit. In the drop down box there are three options.

A-B

: Reader A and Reader B two readers make up an Anti-Passback application.

C-D

: Reader C and Reader D two readers make up an Anti-Passback application.

A-B C-D

: Four Readers make up two areas Anti-Passback application.

Please click “Setup” upload all the settings in the DAC844 device.

Interlock

: Enable door Interlock to prevent two doors from opening at the same time. It

should only be possible to open one door at a time with a valid user code. In the drop down box
there are three options.

A-B

: Reader A and Reader B two readers make up an Interlock application.

C-D

: Reader C and Reader D two readers make up an Interlock application.

A-B C-D

: Four Readers make up two Interlock applications.

Please click “

Setup

” upload all the settings in the DAC844 device.

Note:

The Door Interlock must have door contact equipment.

«
...
17
18
19
20
21
...
»

Содержание DAC844



















































Отзывы:

Нет отзывов