background image

4-INS-PWK0007

NB:

REGISTER ON-LINE TODAY

 

Register your warranty on-line now at www.anvilworld.com

  

NO WEB ACCESS

If you do not have access to the Web. Kindly register by completing 

the warranty registration form and fax it to the ANVIL office in the 

country of purchase.

Failure to do so will invalidate your warranty.

INSTALLATION OPERATION AND CARE OF

PIE WARMER MODELS: PWK0007 R04 / PWA1007 R01 

PIE WARMER

LIMITED WARRANTY 

All equipment which is sold under ANVIL trademark and used for 

commercial purposes is warranted against defects in materials and 

workmanship. The warranty runs for two years from the date of 

original installation and is for the benefit of the original purchaser 

only. All other Warranties ,expressed or implied , statutory or 

otherwise, including without limitations any implied Warranty of 

Merchantability or fitness for purpose are excluded .The Seller shall 

in no event be liable for direct,indirect or consequential damages in 

connection with ANVIL commercial products.

The Sellers obligation under this Warranty is limited to the 

repair of defects without charge. Defective units must be taken or 

shipped,transportation charges prepaid,to ANVIL.

This Warranty is not effective if damage occurs because of 

accident,carelessness,improper installation,lack of proper 

set-up,supervision when required or if the equipment is installed or 

operated in any manner contrary to the installation and 

operating instructions. In these cases,repairs will be made at a 

reasonable cost. Work performed by unauthorized personnel or 

unauthorized service agencies using non Anvil spares voids this 

Warranty.  

Содержание PWA1007 R01











Отзывы: