Page 1
UNPACKING: Unpack the product and check for any damage in-
curred during transit. This should be reported to the responsible
carrier, railway or postal authority, and a request for a damage
report should be made
THESE INSTRUCTIONS MUST BE FOLLOWED FOR US
TO GUARANTEE OUR FULL SUPPORT OF YOUR CLAIM
FOR PROTECTING AGAINST LOSS FROM CONCEALED
DAMAGE. THE FORM FOR FILING SUCH A CLAIM WILL
BE PROVIDED BY THE CARRIER.
!
GENERAL INSTALLATION AND OPERATION INSTRUCTIONS:
INSTALLATION, OPERATION AND CARE OF :
CAKE DISPLAY FRIDGE
MODELS CDF2001
The ANVIL Cake Display Fridge is designed for illuminated display
of food products at temperatures between 2° - 8° C. The cooling
system ensures that the products placed inside can be stored at the
correct temperature.
1. This unit should be installed on a sturdy level floor. Place the
unit at least 200mm away from surrounding walls. Remember to
install the unit in the most convenient location for care of
cleaning, maintenance and point of sale display.
2.
IF THE UNIT HAS BEEN TRANSPORTED IN A NON-VERTICAL
POSITION ALLOW AT LEAST 1 HOUR FOR THE FOR THE OIL TO
FLOW BACK INTO THE COMPRESS0R AFTER FINAL
INSTALLATION BEFORE SWITCHING ON
3. Assemble the shelving system, the mirror glass shelf should be
installed at the last (bottom) rack.
4. Remove all the protective film from exposed stainless steel parts
and surfaces.
5. The unit is designed for food display. Clean carefully before
using by following the specific cleaning instructions detailed later
in this manual.
6. Plug the unit into a suitable power source as detailed later in this
manual.
7. The unit is provided with an illuminated main switch. Operation
of this switch
turns on the unit and allows set up of the temperature.
8. Set the desired operating temperature on the digital controller.
Specific setting instructions are detailed later in this manual.
Page 5
10
685
645
1855
CAKE DISPLAY FRIDGE
MODEL
CDF2001
