Antx Messenger-W, Руководство пользователя

Страница: 12 / 20

12

LED 4 (RED) - CAN
State Rate Definition
On Solid Fault, no engine bus activity
detected
Blink 2 blinks every
second OBD traffic detected, but no
response to data queries
Blink 1 blink every second Engine bus not selected, check DIP
Switch 2
Off Solid No Faults, engine bus activity
detected

LED 5 (RED) - GPS
State Rate Definition
Blink 1 blink every second No Fix
Off Solid Fix

LED 6 (RED) - Modbus
State Rate Definition
Blink Rapid (burst) Ok - Rx/Tx Activity on Port 2 or 3
On Solid Fault (comm. timeout error)
Off Solid Ok - No Faults

LED 7 (RED) - USR1
State Rate Definition
Blink 1 blink every second Lithium Coin Cell battery is low or
RTC has stopped
On Solid If DIN1, DIN2, DIN3, or DIN4 are
configured as pulse counter inputs,
this LED will light when any input
is activated, off when all inputs idle
Off Solid No Faults