Antunes RS-1000 INTL, Руководство пользователя

Страница: 8 / 21

®
P/N 1011504 Rev B 11/18
8
System Settings
Follow these steps to access and edit
the system settings.
1. From the
Heating or Ready
screen, press
Tools
.
2. This opens the Tools screen
shown below.
3. To work with settings items, press
System Settings . This opens
the
System Settings
screen
shown below.
4. From this screen you can change
the following system settings:
y
Degrees : F or C.
y
Beep
(sounds when cooking
cycle completes). Options
are: HI, LO, and OFF.
y
Click (the sound that accompanies
each screen press). Options
are: HI, LO, and OFF.
NOTICE : You must press the radio
button next to each setting
before you can adjust it.
5. Once you have changed the
System settings as desired, press
Save . The system saves the
changes to memory.
To cancel your changes, press Cancel
to return to the Tools
screen.
Loading Menu Data
The unit is equipped with a USB
interface on the back of the unit. This
allows you to load menu items into the
system. To load a menu file:
Make sure the unit displays the Ready
or
Heating
screen. Insert the USB
memory stick loaded with the electronic
menu file into the USB connection
(Figure 3).
1. Press Tools to open the Tools
screen.
2. Press USB Import . The
system reads the USB device and
displays a list of acceptable menu
files on the
USB Import
screen.
3. Use the Up and Down arrows
( or ) to locate the proper file
name.
NOTICE
: The system displays one
file name at a time. Be sure to
scroll through the choices to
find the appropriate file.
4. When the proper file name ap -
pears on the screen, press to
begin loading the file into the
system.
When the import is complete, the sys-
tem displays:
Copy Completed Remove USB,
Press OK
5. Remove the USB stick and press
. The system returns to the
Tools Screen. You can verify the
import by going back to the Ready
screen by pressing the cancel
button.
Figure 3. USB Port
USB Cover
Rotate cover
clockwise to
access USB Port