GST-3V BUN TOASTER
8
P/N 1012002 Rev. B 04/18
Daily Cleaning
1. Turn the toaster off. The toaster enters a cool-
down mode and will automatically shut down
when complete.
NOTE: You do NOT need to wait for the cool down
to complete.
2. Put on heat-resistant gloves. Remove the front
and rear conveyor covers and the bun buffer.
(Figure 5).
3. Clean the outside surfaces of the toaster with
a paper towel dampened with an approved
degreaser solution. Be sure to remove all debris
from horizontal surfaces of toaster. Allow to air
dry.
4. Clean the front and rear Conveyor Covers and
Bun Buffer with a paper towel dampened with an
approved Glass & Multi-Surface Cleaner. Wipe
with a clean sanitizer-soaked towel and allow to
air dry.
5. Inspect the belts for any tears, discoloration, or
damage to the Belt Wrap Snaps. Replace any
damaged Belt Wrap as needed. With proper
maintenance, the Belt Wraps can last six months
or longer.
6. If the belts are in good condition, spray a clean,
sanitizer-soaked towel with an approved all all-
purpose cleanser. Wipe the belts clean. Next,
wipe the front belt with a clean, sanitizer-soaked
towel. Allow to air dry.
NOTE: The Belts will continue turning while in cool
down mode. You may need to repeat Step 6 more
than once to fully clean the belt wraps.
7. Reassemble the unit and return to operation.
MAINTENANCE
Figure 3.
Figure 4. Example of Damaged Belt
BELT IS TORN AND FOLDED.
REPLACE BELT.
