Antunes 9300636, Руководство пользователя

Страница: 9 / 20

EGG STATION DUAL ZONE
9 P/N 1011450 Rev. F 05/18
PROGRAMMING
Turning cooking surfaces on or off
Press and hold the Program button for 5 seconds until
the unit beeps. Both displays show ON.
• To turn the front cooking surface off, press the
Down arrow button.
• To turn the rear cooking surface off, press the Up
arrow button.
You cannot turn both cooking surfaces off at the same
time. For example, if the rear surface is off and you try
to turn the front surface off, the rear will turn on.
NOTE: This setting is not saved. When the unit is
powered off and powered back on, both cooking
surfaces are set to on.
Manager Mode
Manager mode allows access to view and change the
programming. This includes:
• Adjust Timers
• Adjust Rear Setpoint Temperature
• Adjust Front Setpoint Temperature
• Adjust Temperature Units (
°
F/
°
C)
• Adjust Beeper (three volume levels)
• View Elapsed Usage Time
• View Errors
• View Internal Control Board Temperature
• View power line information
To enter manager mode:
1. Press and hold the Program button for approxi-
mately 5 seconds until the unit beeps. Release
the button. Then, press and hold the Program
button again for approximately 10 seconds until
the unit beeps.
2. The unit enters manager mode at the Adjust
Timers option. Press the desired timer to change
and use the Up and Down arrow buttons to
change the time as desired. Press the Program
button to save the change. The unit moves to
the next option which is Adjust Rear Setpoint
Temperature .
3. Use the Up and Down arrow buttons to change
the Rear setpoint temperature as desired.
The default is 275° F. Press the Program but-
ton to save the change. The unit moves to the
next option which is the Adjust Front Setpoint
Temperature .
4. Use the Up and Down arrow buttons to change
the Front setpoint temperature as desired. The
default is 275° F. Press the Program button to
save the change. The unit moves to the next
option, Adjust Temperature Units .
5. Use the Up and Down arrow buttons to change
the unit between Fahrenheit and Celsius. Press
the Program button to save the change. The unit
moves to the next option, Adjust Beeper .
6. Use the Up and Down arrow buttons to change
the beeper setting. There are three options with
variable volumes and sound. Press the
Program
button to save the change. The unit moves to the
next option, View Elapsed Time .
7. The View Elapsed Usage Time option shows the
total time of unit operation. This option cannot be
edited. Press the Program button to move to the
next option,
View Errors
.
8. The View Errors option shows any errors that
have occurred. This option cannot be edited.
Press the Program button to move to the
next option, View Internal Control Board
Temperature .
9. The View Internal Control Board Temperature
shows the current ambient temperature of the
control board. This option cannot be edited. Press
the Program button to move to the next option,
View Power Line Information .
10. The View Power Line Information option shows
power usage information. This option cannot be
edited. Press the Program button to return to the
Adjust Timers option. From here, you can select
another timer to adjust or wait for 10 seconds for
the unit to return to operation mode.
Factory Default Cooking Times
The factory default cooking times are listed below per
button name:
• Round - 2 minutes 30 seconds
• Folded - 2 minutes
• Timer 3 - 30 seconds
• Timer 4 - 30 seconds