Antunes 9300636, Руководство пользователя

Страница: 5 / 20

EGG STATION DUAL ZONE
5 P/N 1011450 Rev. F 05/18
Unpacking
1. Remove unit and all packing materials from
shipping carton.
NOTE: If any parts are missing or damaged, con-
tact Antunes Customer Service IMMEDIATELY at
+1-877-392-7856 (toll free).
2. Remove information packet.
3. Remove all packing materials and protective
coverings from the unit.
4. Wipe all surfaces of the unit with a hot damp
cloth.
NOTE: Do NOT use a dripping wet cloth. Wring it
out before use.
5. Clean the Egg Rings, Egg Rack, Top Cover, and
Scrap Pans in hot, soapy water. Rinse in clear
water and allow to air dry.
6. Reassemble all parts to unit.
IMPORTANT
Failure to level the unit may result in unevenly
cooked product.
Leveling the Unit
The egg station must be placed on a level surface and
leveled before use. The unit comes with four individually
adjustable legs. Place the unit on a sturdy flat surface
and adjust the legs as needed. Turn legs clockwise to
shorten or counter-clockwise to lengthen.
To verify if the unit is level, use a level (if available). If a
level is not available, open the top cover and egg rack
and pour a small amount of water directly onto the cool
grill surface. If the unit is level, the water will pool in the
middle and not drain toward a side or corner of the grill
surface. Make adjustments as required.
Turn Leg
Clockwise
to shorten.
Turn Leg
Counter-clockwise
to lengthen.
Figure 1. Next Generation Egg CookerESDZ=
INSTALLATION
Pivot Rod
Front Egg Rack
and Rings
Rear Egg Rack
and Rings
Rear Top
Cover
Front Top
Cover
Front Grill
Surface
Rear Grill
Surface
Figure 2. Components
Egg Ring