Antunes, AJ UTX-200, Руководство пользователя

Страница: 12 / 20

Universal ToasTer UTX-200
12
P/N 1010904 Rev. B 03/12
McDonald’s
A.J. Antunes & Co.
oPeration (continued)
UtX-200 Unit status Mode
This mode provides feedback on how the unit systems
are performing. No adjustments can be made in this
mode. Also, the display will remain on the selected
screen in this mode until you switch screens or exit Unit
Status Mode.
Follow these steps to view the Unit Status mode.
1. From any operation mode (Bagel Ready, Bagel
Wait, Muffin Ready, Muffin Wait, Lunch Ready or
Lunch Wait), open the Front Cover and press and
hold the adjUst button for 3 seconds.
2. The following appears on the display in sequence
(use the neXt and Prev buttons to scroll
through these items):
• Temp-Platen-Set Pt
• Run Time
• Over Temp Sense
(temperature of the air coming out of the blower)
• Ambient
(air temperature inside the electrical enclosure)
• Fan Speed % of Normal
L: (Left Fan), C: (Center Fan), R: (Right Fan)
• Speed-Motor-Set-Pt
• Lower IR
(The set point current value appears on the top
line. The actual current value appears on the
lower line)
• Upper IR
(The set point current value appears on the top
line. The actual current value appears on the
lower line)
3. Press the
PrGM
button once. This exits the Unit
Status Mode and returns to the current operation
mode screen.
Purging Products from the toaster
note: the unit must be in a readY or Wait mode
in order to purge products.
There are two ways to purge products from the unit:
1. faCinG front of Unit
With the unit in any READY or WAIT mode, open
the front Cover. Press and hold the neXt arrow
button until the product is purged from the unit.
See Figure 5.
Once the product is purged, release the neXt
arrow button and the unit will return to normal
operating speed.
Lunch Ready
PRGM
MOTOR
PLTN
UT
I/R
NEXT PREV SELECT
BREAKFAST/LUNCH
ADJUST
figure 5. Purging Products: front of Unit
2. faCinG rear of Unit :
With the unit in a READY or WAIT mode, you
can also press and hold BOTh of the MUffin/
baGel selector buttons together to purge prod-
uct from the unit. These buttons are located at the
rear of the unit. See Figure 6.
Once the product is purged, release both
MUffin/baGel selector buttons.
These procedures temporarily speed up the unit to
purge products out to the front of the toaster.