Antrica ANT-4000E Скачать руководство пользователя страница 39

Страница: 39 / 59

different port is configured in the SMTP server, this port needs to be changed accordingly).

Sender Address

: Enter an account registered in the SMTP server.

ID & password:

When the server requires authentication, ID and Password of an E-mail

account need to be entered.

Destination address

: Enter Destination address. More than one address can be entered by

delimiting comma (,) or semi-colon (;). Destination address can take up to 63 characters.

Video Clip Attaching:

A video clip stored at the moment of the event can be attached as an

AVI or JPEG file format. If using dual Encoding, Primary video or Secondary video (H.264 only)
can be selected.

Number of Frame

: Enter frame number of JPEG Capture (from 1 to 10)

FTP Upload

Specify the settings to upload event information, when FTP is selected as an event action.

Server Address:

Enter an address of an FTP server to receive video files

Port:

Specify a port for FTP operation (

Port 21 is the default port in FTP operation.

If a

different port is configured in the FTP server, this port needs to be changed accordingly.).

ID & password

: Enter ID and Password for accessing the FTP server.

Upload video:

Primary video and Secondary video (H.264 only), JPEG can be selected as an

upload method.

Continuous upload:

Continuous upload “on” allows the video image to be transmitted

regularly, regardless of occurrence of events.

Number of Frame

: Enter frame number of JPEG Capture (from 1 to 10)

Upload duration

: Specify recording duration of a video clip to be transmitted.

Upload interval

: Specify transmission interval.

Recording duration is not included in transmission interval. For example, if upload interval is 60
seconds and upload duration is 20 seconds, a video clip for 20 seconds is transmitted every 80
seconds.

Event Record

Specify duration of recording video generated by events to send through e-mail or upload

through FTP.

Pre-event Time:

Specify the duration of recording before an event happens.

Post-event Time:

Specify the duration after the event is cleared.

Max duration is 30 seconds

7.Preset Configuration

Содержание ANT-4000E




























































Результаты поиска

Содержание ANT-4000E

Отзывы:

Antrica ANT-4000E, Руководство пользователя, Страница: 39 / 59

Результаты поиска

Содержание ANT-4000E

Отзывы: