-3-
-4-
TECHNICAL SPECIFICATIONS
MARKING EXPLAINED
4 / 5 -9 / 9-13 AT 1 / 1 / 1 / 2 / 379 CE
Light shade
Dark shades
Identification of the manufacturer
Optical class
Diffusion of light class
Variation in luminous transmittance class
Angle dependency class
Number of the standard
Optical Specifications
This is a sample of EN379 marking only. For the product you are
using, please refer to the marking information on the filter.
HOT PARTS can cause severe burns !
• Never touch hot parts bare handed.
• Allow adequate cooling period before touching work piece.
NOISE can damage hearing !
•
Noise from some processes or equipment can damage hearing.
• Wear approved ear protection if noise level is high.
GENERAL INFORMATION
Antra X60 Series Auto-Darkening Welding Helmet does not protect against severe impact hazards
,
such as fractured grinding wheels or abrasive discs
，
explosive devices or corrosive liquids
．
Machine guards or eye splash protection must be used when these hazards are present
．
The auto-darkening welding filters are designed for Arc welding or cutting applications
．
The unit
is suitable for all Arc welding processes such as MIG
，
MAG
，
TIG
，
SMAW
，
Plasma Arc
，
and
Carbon Arc
．
This auto-darkening welding helmet is not recommended for "overhead" welding applications,laser
welding or Iaser cutting applications.
In the event of electronic failure, the welder remains protected against UV and IR radiation
according to shade 16.
The auto-darkening welding filter should always be used with original inner and outer cover lenses.
The manufacturer is not responsible for any failure due to modifications to the welding filter or the
use of the filter from any other manufacturer's helmet.
FLYING METAL can injure eyes !
• Wear ANSI approved safety glasses with side shields under your welding helmet.
•
Welding, chipping, wire brushing, and grinding cause sparks and flying metal. As welds
cool, they can throw off slag.
Standards
Model
S/N:XXXXXXXXXXXXXAXXX
Serial number
Model
ADF Model
Viewing Area
Cartridge Size
Light State
Dark State
UV/IR Protection
Sensors
Grinding
B
attery Type
Sensitivity Control
Solar Cell
Delay Control
TIG Rating
Operation Temperature
Storage Temperature
Standards Compliance
AH6-260-XXXX
AH7-360-XXXX
AH6-660-XXXX
AH7-860-XXXX
AntFi-X60-2
AntFi-X60-3
AntFi-X60-6
AntFi-X60-8
98
x
42mm /
3.86"
x
1.73"
98
x
53mm /
3.86"
x
2.09"
98
x
62 mm /
3.86"
x
2.44"
98
x
89mm /
3.86"
x
3.5"
110mm x 90mm x 9mm / 4.33" x 3.54" x 0.35"
133
x
114
x
9mm /
5.24"
x
4.5"
x
0.35"
Shade DIN 4
Variable Shade 5~9/9~13
Permanent Shade DIN 13
Shade DIN 4
2 x CR 2032 ( Lithium 3 Volt )
2 x CR 2032
( Lithium 3 Volt )
2
x
CR 1616
(Replaceable)
Knob Adjustable
Yes
0.1-1.0 Seconds Continuously Adjustable
-5°C to +55°C (23° F to 131° F)
-20°C to +70°C (-4° F to 158° F)
4
＞
2Amp
ANSI Z87.1-2010 & CSA Z94.3-2007 & CE EN379:2009-07
