13 Measuring
C76IB003EN-E
73
Number of entries
The sample list can contain up to 200 entries. The 201st entry overwrites the
oldest entry. Entries older than 24 hours are automatically removed.
The sample list will be automatically cleared if you switch off the instrument.
To create or edit a sample list
TIP
If you have activated user-defined data fields (see Chapter 10.3), the data fields
are shown in columns.
1. Tap <Sample List> to open the sample list window.
2. To enter a sample name, tap on a cell in the column "Name".
3. Tap on a cell in the column "Method" and select a method from the drop-
down list.
4. Tap on the
icon in the column "Quick Settings" and select measurement
type and measurement settings as desired.
5. To exit the sample list and save the changes, tap <Main Screen>.
To edit or delete a sample in the sample list
TIP
You cannot edit or delete samples in the sample list that have already been
measured.
•
To edit a sample, highlight the row and change the settings as desired.
•
To delete a sample from the list, highlight the sample and tap <Delete
Sample>.
•
To exit the sample list and save the changes, tap <Main Screen>.
To save a sample list
1. Tap <Sample List> and then <List Management>.
2. Select
"Save Sample List"
and then <OK>.
NOTICE
In the "Sample List" mode and "Simple" mode, each measurement is entered
into the data memory and the sample list. The maximum data storage volume
of 1000 data is calculated from the already measured samples (data memory)
plus the samples in the sample list. Therefore, regularly clear the sample list
and the data memory.
