10 Defining General Settings
C76IB003EN-E
45
To enter name and address for the header
1. Tap <Menu> and select
"Setup > Printout Settings > Name and
Address"
.
2. Enter the name and address and tap <OK>.
10.2.3
Activating/Deactivating an Automatic Printout
1. Tap <Menu> and select
"Setup > Printout Settings > Automatic Printout"
.
2. Use the drop-down box "Frequency" to define if you want to have an
automatic printout after each sample or if you do not want to have an
automatic printout.
3. Use the drop-down box "Printer" to define on which printer you want to have
the print reports.
4. Use the drop-down box "Report" to select the report layout.
The "list report" layout type cannot be selected for the automatic printout.
5. Tap <OK> to save the changes.
Related topics
Registering, Editing, Deleting a Printer: Chapter 9.3.2
Defining the Result Output: Chapter 12.2.3
Printing and Exporting Results and Other Data: Chapter 15.6
10.3 Setting Sample List Options
In the
"Sample List"
menu, you can:
•
Select the sample list mode.
•
Define automatic sample name additions before and after the sample name.
These additions will be added to each sample name after the measurement
of the sample was finished. You can compose the additions out of a fixed
part and an additional data field (date and time, user name, sample number,
etc.).
•
Activate up to three user-defined data fields and give names for the fields. In
these fields, you can assign special types of information of your choice to
your samples. Typical examples are a filling line number, tank number or
batch identification. For each data field that you define, an extra column will
be added to the sample list.
