7
QUICK SET-UP
Streaming in the Manual Mode
This mode requires manual configuration of the streaming parameters in order to replicate the four types of streaming listed above. The data
packets are streamed constantly. Set the destination port to the port that your application uses to receive video. Set your PC network adapter
to a static IP address with the same subnet as the AB-HDRX unit.
Unicast, RTP (manual mode)
•
Set the Streaming mode to “Manual” as shown in Figure 3.
•
Set the Encapsulation type to RTP-TS
•
Enter the destination address of your computer
Figure 3: Change the Streaming Mode to Manual
•
Unicast, UDP (manual mode)
1. Set the Encapsulation type to UDP-TS
2. Enter the destination address of your computer
•
Multicast, RTP
1. Set the encapsulation type to RTP-TS
2. Enter a multicast address for the destination address
•
Multicast, UDP
1. Set the encapsulation type to UDP-TS
2. Enter a multicast address for the destination address
