6
QUICK SET-UP
Streaming Modes
There are three selections for streaming modes:
•
Off - The unit does not stream in the “Off” mode.
•
RTSP - In the RTSP mode the video streaming is sent only as clients request it. This can occur via unicast (single client) or multicast
(multiple client) calls.
•
Manual - Streaming is always on in the manual mode and can be sent to a single client or multiple clients using a multicast destination
address.
RTSP Streaming Modes
There are four supported streaming modes from the RTSP server.
•
Unicast, RTP
•
Unicast, UDP
•
Multicast, RTP
•
Multicast, UDP
There is no need to set any parameters in this mode as the RTSP server takes care of this automatically.
RTSP Mode Set-up
Unicast, RTP - This mode will stream the data packets encapsulated by an RTP header to a single client only.
Use the AB Control Software to download and open the preset file for editing.
Set the mode to RTSP as shown in Figure 2.
Figure 2: Preset file for Video Streaming Parameters
Upload the preset file into the radio
The default network URL for this method is rtsp://<device ip address> (Default 192.168.010.035)
•
Unicast, UDP - This method will stream the data packets without the RTP header to a single client. The default network URL for this
method is rtsp://<device ip address>/unicast/udp
•
Multicast, RTP - This method will stream the data packets with the RTP header to multiple clients. The default network URL for this
method is rtsp://<device ip address>/multicast
•
Multicast, UDP - This method will stream the data packets without the RTP header to multiple clients. The default network URL for this
method is rtsp://<device ip address>/multicast/udp
