AST, AST-L, and AST-PLUS Models
21
Anthony Lifgtates, Inc.
800-482-0003
www.anthonyliftgates.com
12. Mount the fuse in a desired location.
13. Route the short, 3 foot section of cable into the
battery box and connect the end to the positive (+)
post of the truck battery.
14. Use the control switch to raise and lower the
platform.
15. Coat any terminal ends, studs, and nuts in the
liftgate electrical system with a suitable corrosion
inhibiting lubricant.
16. Replace the battery box cover and lock it in place.
NOTICE
Do not apply petroleum-based
lubricant to the liftgate motor start
VROHQRLG8VHRQO\DGU\¿OP
lubricant on this component.
4.4.7 Adjust the Wheel Arm
The wheel arm helps unfold the platform as it is lowered
from the stored position. The wheel arm can be adjusted
VRWKHSODWIRUPXQIROGVZLWKHLWKHUJUHDWHURUOHVVHUHႇRUW
WARNING
Never stand behind the
liftgate when it is opened.
Always stand to the side
and away from the edge of the platform.
When adjusting the position of the wheel arm, consider
that the vehicle may be parked on a upward, sloped
surface. Adjust the wheel arm to prevent the platform
from completely unfolding in this type of situation.
1. Test and adjust the wheel arm.
2. If adjustment is needed, remove the two bolts on the
wheel arm and the nuts on the wheel arm.
3. Lengthen or shorten the wheel and channel assembly
on the tube, as desired.
4. Align the two holes in the wheel and channel
assembly with the holes in the tube nearest the
desired position.
5. Re-install the two bolts and nuts. Tighten the nuts to
secure the wheel and channel assembly.
