Anthem CD 1 Скачать руководство пользователя страница 2

S E T T I N G

U P

The CD 1 comes with one 6922 tube. The 6922 tube may be

replaced with an ECC88/6DJ8 or E188CC/7308 with no 

circuit modification. This tube was chosen for its reliability

and extremely low noise. The tube’s low noise heightens

dynamics and provides a natural tonal balance.

INSERTION OF THE TUBE

1. Using the screwdriver supplied, remove the cover of the

CD 1. For your convenience, only eight (approx.) of the

screws are installed at the factory.

2. When handling the tube, it is recommended that the

cotton glove provided be worn to prevent skin oils from

depositing on the glass surface.

3. Noting the location of the tube socket in the top view

photo (Figure 2) or directly on the PC Board. Once located,

take the tube and inspect the pins, noting the larger space

between two of the pins (see Figure 1). This space will

match with the socket. Insert the tube into the tube socket,

making sure all pins and pin holes are aligned. Do not

force the tube into the socket. “Rock” the tube gently

while pushing slowly until it is firmly seated.

After the insertion of the tube, replace the cover and fasten

it with the screws provided. The CD 1 is now ready for operation.

For further information on tube replacement, NOS (New Old

Stock) tubes, contact your dealer, a Sonic Frontiers

Customer Service Representative or The Parts Connection,

a division of Sonic Frontiers.

WARNING - DISCONNECT THE AC

DETACHABLE POWER CORD FROM THE

CD 1 AND WAIT 5 MINUTES BEFORE

REMOVING COVER, TUBES OR FUSE.

Note the larger space 
between two of the pins and
holes for proper alignment 
of tube and socket.

Figure 1

DANGER:

INVISIBLE LASER RADIATION 

POSSIBLE WHEN THE TOP COVER

IS REMOVED. AVOID DIRECT 

EXPOSURE TO THE LASER BEAM.

LIMITED FIVE YEAR WARRANTY

Sonic Frontiers International warrants to the purchaser that

each component is free of manufacturing defects for a period

of five (5) years from the date of purchase. This five (5) year

limited warranty excludes all vacuum tubes and CD

Transport mechanisms, which are warranted for a period of

twelve (12) months. To receive this warranty, the original

purchaser must complete and mail to Sonic Frontiers

International, within thirty (30) days from the date of 

purchase, the enclosed Warranty Registration Card which

validates the warranty. This warranty is subject to the 

following conditions and limitations:

DISCLAIMER OF LIABILITY

Under no circumstances does Sonic Frontiers International

assume liability or responsibility for injury or damages 

sustained in the use or operation of this equipment or for

damages to any other equipment connected to it. Sonic

Frontiers International reserves the right to make design

changes or improvements without the obligation to revise

prior versions. All specifications are subject to change 

without notice.

Warranty applies only to the original purchaser and is 

non-transferable.

This warranty is void and inapplicable if the product has

been handled other than in accordance with the instructions

of our Owner's Manual,  abuse or misused, damaged by

accident or neglect or in being transported, or the defect is

due to the product being tampered with, modified or

repaired by anyone other than Sonic Frontiers International,

or an authorized Sonic Frontiers International repair service

center.

Warranty does not cover normal maintenance.

Sonic Frontiers International shall not be responsible in any

way for consequential or indirect damages or liabilities

resulting from the use and operation of the product covered

herein or resulting from any breach of this warranty or any

implied warranty relating to said product. 

During this period, Sonic Frontiers International will repair or

replace any defective components free of charge. A Return

Authorization Number (RA number) is required before any

product is returned to our factory for any reason. This number

must be visible on the exterior of the shipping containers for

Sonic Frontiers International to accept the return.

Units to be repaired by Sonic Frontiers International must be

sent shipping and insurance prepaid by the original 

purchaser in the original packing material. A returned 

product should be accompanied by a written description of

the defect. Repaired units will be returned by Sonic

Frontiers International shipping and insurance prepaid.

Units shipped to us without a Return Authorization Number

or without a visible RA Number on the exterior of the shipping

containers will be returned to the sender, freight collect.

All other warranties or conditions either written or implied

are void.

Sonic Frontiers International reserves the right to improve

the design of any product without assuming any obligation

to modify any product previously manufactured. This warranty

is in lieu of all other warranties expressed or implied, of

merchantability, fitness for any particular purpose and may

not be extended or enlarged by anyone. In no event shall

Sonic Frontiers International, their agents or representatives

be responsible for any incidental or consequential 

damages. Some jurisdictions do not allow limitations of

incidental or consequential damages, so this exclusion

may not apply to  you.

W A R R A N T Y

FREQUENTLY ASKED WARRANTY QUESTIONS

WHAT IS THE DISPLAY WARRANTY?  

Display equipment sold by an authorized dealer has a full

5 year Parts & Labor and 30 day Tube & Transport

Mechanism warranty (as of the date of the customers

invoice) or the balance of the 1 year Tube & Transport

Mechanism warranty (as of the date of the dealer

invoice) - which ever is longer. 

WHAT IS THE USED EQUIPMENT WARRANTY?  

The balance of the 5 year Parts & Labor and 1 year Tube

& Transport Mechanism warranty can be transferred on

used equipment only IF the unit is traded in to an authorized

Sonic Frontiers/Anthem Dealer. An authorized SF/

Anthem dealer can resell the unit with the remaining

warranty if it is cosmetically acceptable, in perfect working

condition, and has not been internally or externally

altered in any way.  We ask that the dealers call the 

factory and advise us of the serial number of the unit to

register the warranty of the new owner.

WHAT IS THE USED EQUIPMENT WARRANTY - FROM A 

NON-AUTHORIZED DEALER?

Used equipment purchased from a non-authorized dealer

or private sale  has no SFI warranty.

PLEASE READ CAREFULLY!

Содержание CD 1








Отзывы: