Anthem AVM 40, Руководство по эксплуатации

Страница: 35 / 86

27
3.5 SOURCE SETUP / PRESETS
This is where you set up each Source and Path according to how you want them to be used.
Copy MAIN to ZONE or REC:
If you want MAIN to always be copied to another Path (see section 4.3), change ‘Manual’ to ‘Always’. This
is recommended if you want a Source that only has digital audio output to be used in ZONE2, ZONE3, or REC,
or if you want MAIN and another Path to always play the same Source. ‘Always’ setting is not recommended
if you want Source selection to be independent – in this case, see the highlighted part of section 2.2.
Source Setup:
Besides setup of each source, DVD, TV, and SAT have expanded memory allowing you to set multiple
configurations. For example, if you have more than nine source components, you can use DVD1 to connect
one and DVD2 to connect another. Once set up, DVD1 and DVD2 can be selected by pressing the DVD source
button one or two times. If all four DVD layers are used, you can either press the DVD button up to four times
to select, or use the macros in Appendix A for direct access.
To enable DVD2, DVD3, DVD4, TV2, TV3, TV4, or SAT2, at the top of its submenu change “LAYER: Disabled”
to “LAYER: Enabled”.
3. SETUP MENU
continued …
5. SOURCE SETUP / PRESETS
a. CD
b. 2-Ch
c. 6-Ch
d. TAPE
e. FM/AM
f. DVD1
g. DVD2
h. DVD3
i. DVD4
j. TV1
k. TV2
l. TV3
m. TV4
n. SAT1
o. SAT2
p. VCR
q. AUX
r. COPY MAIN->ZONE2: Manual
s. COPY MAIN->ZONE3: Manual
t. COPY MAIN->REC
: Manual