Choose between 0 to -18dBFS amplitude for Oscillator 1 & 2 output signal.
6
6. Oscillator 2
Adjust the Oscillator 2 frequency.
7
7. Line Out Volume
Set the Line Out volume in dB.
8
8. Brightness Slider
Set the Discrete 4 screen brightness.
9
9. TB Latency Mode (Mac Only)
Lets you set the Thunderbolt™ Latency Mode to Fast, Medium, or Slow.
10
10. ASIO Control (Windows-only)
This is where you adjust the Discrete 4 ASIO driver for best performance on Windows computers.
11
11. Buffer Size (Samples)
Lets you set the ASIO driver buffer size. Short buffer sizes minimize latency but take more CPU power. Bigger buffer sizes
result in lighter CPU load, but generate more latency. We recommend low buffer sizes for live recording & monitoring, and
higher buffer sizes during mixdown.
12
12. USB Streaming Mode
Lets you switch between several latency settings for USB streaming.
6.2.2 PREAMPS
(https://en.antelopeaudio.com/wp-content/uploads/2018/02/discrete4-panel_03-2.jpg)
Always visible in the Control Panel, the Preamps section lets you control the Discrete 4 Mic Preamps. The following
options are available:
