Antari Z Series, Руководство пользователя

Страница: 11 / 48

11
After 2,000 hours of operation, we suggest you use distilled water to clean the heater as following steps:
1. Fill proper distilled water into a clean tank and connect the fluid tube of the fog machine to the tank.
2. Run the fog machine in a well ventilated place until the tank is empty.
3. Use a dry cloth to wipe the fog machine.
If the fog machine is not in use, please clean it before storage. Store the fog machine in a dry and cool
place.Run the fog machine at least once a month.
Please read and save these instructions.
DMX Connector Pin Assignment
The machine provides a 3 or 5 pin XLR connector for DMX connection.The diagram below indicates pin
assignment information.
Pin Function
1 Ground
2 Data-
3 Data+
4 N/A
5 N/A
Antari Z-1200II, Z-1500II, Z-3000II on-board DMX settings
U
Channel A
0 - 5 = OFF
6 – 249 = Volume Control ( 5% - 95%)
250 – 255 = Maximum Volume Output (100%)
The Z-1200 II, Z-1500II & Z-3000II Fog Machines have on-board DMX control. These models use 1
channel to control volume output operation. Each channel has a value range of 0 to 255. Timer functions
such as duration and interval can be programmed using the DMX controller or the DMX control software
being used by the lighting and effects operator.