Antari W-508, Руководство пользователя

Страница: 12 / 44

Cleaning and Storage
Do not allow the fog liquid to become contaminated. Always replace the cap
on the fog liquid container and the fog machine liquid tank immediately after
filling. Cleaning your fog machine regularly can help you to reduce the
frequency of parts replacement and maintenance costs. After every 40 hours
of continuous operation, it is recommended to use distilled water to clean the
heater according to the steps below.
The recommended cleaning regimen is as follows:
1. Fill properly distilled water into a clean tank and connect the fluid tube of
the fog machine to the tank.
2. Run the unit in a well-ventilated area until the tank is almost empty.
3. Use dry cloth to wipe the fog machine. Cleaning is now complete. Refill with
fog liquid. Run the machine briefly to clear any remaining liquid from the
pump and heater.
Note: All fog machines are prone to clogging due to the thick consistency
of fog liquid and the high temperature at which it vaporizes. However, a
properly maintained fog machine should provide years of reliable use.
Clean with a dry cloth only. Store dry.
If the fog machine is not in use, please clean it before storage. Store the fog
machine in a dry and cool place. Operate the fog machine at least once a
month. A test-run consists of warming-up the machine followed by a few
minutes of fog emission.
Technical Specifications
Approval
This product is in accordance with the R&TT E directive (Radio and
Telecommunication Technical Equipment) of the European Union and falls into
equipment Class 1. In all E U member countries, the operation of this wireless
Model
Power Supply
Power Consumption
Output Volume
Tank Capacity
Fluid Consumption
Weight
Dimensions (LxWxH)
Remote Included
Warm-up Time
W-508
100~240V A C 50/60 Hz
800 W
3,000 cu.ft/min (85 m³/min)
0.8 liters
60 min /0.8 liter
3.8 kg
315 x 128 x 166 (mm)
W-1
100 seconds
W-510
100~240V A C 50/60 Hz
1,000 W
10,000cu.ft/min (284 m³/min)
2.8 liters
13 min / liter
11.4 kg
468 x 250 x 148 (mm)
W-1
12min
-09-