Antari M-9 RGBAW, Руководство пользователя

Страница: 8 / 20

8
© 2019 Antari Lighting and Effects Ltd.
www.antari.com
Turn On/Off run last setting function
Turn On/Off Jet Mode, set time from 2 to 7 seconds.
Turn On/Off W-DMX
Reset W-DMX connection
DMX Connector Pin Assignment
The machine provides 3 or 5 pin XLR connector for DMX connection. The diagram below indicates
pin assignment information.
Pin Function
1 Ground
2 Data-
3 Data+
4 N/A
5 N/A
DMX Operation
Making the DMX Connection – Connect the machine to a DMX controller or to one of the machines
in the DMX chain. The machine uses both 3-pin and 5-pin XLR connector for DMX connection, the
connector is located on the rear of the machine.
Run Last Setting
On
W-DMX 512
Off
W-DMX Reset
Yes
2-7 Sec Jet Mode
2 Sec