Antari M-9 RGBAW, Руководство пользователя

Страница: 15 / 20

15
© 2019 Antari Lighting and Effects Ltd.
www.antari.com
Fluid
Use Antari FLC water-based Fluid for the best effect for the M-9 RGBAW Fogger. The machine is
tested and calibrated with this liquid to get the best output performance. Warranty will be voided if
any other type of liquid is used, improper use of liquid may lead to machine failure and malfunction.
Service and Maintenance
․
Do not allow the machine to become contaminated.
․
Remove dust from air vents with air compressor, vacuum or a soft brush.
․
Only use a damp cloth to clean the casing.
․
Before storing run distilled water through the system to help avoid condensing the pump or
heater.
․
It is recommended to run the machine on a monthly basis in order to achieve best
performance and output condition.
․
Excessive dust, liquid and dirt built up will degrade performance and cause overheating.
Breaker Reset
Disconnect AC power before reset breaker. Only replace fuse with same type and rating.
Step 1: Disconnect AC power
Step 2: Flip breaker to ON position
Step 3: Turn on machine to test
Breaker
100V = 16A 250V
120V = 15A 250V
240V = 9A 250V