9
© 2019 Antari Lighting and Effects Ltd.
www.antari.com
Registering a transmitter
Transmitters can be paired or deleted from the receiver. Each receiver can pair up to 5 transmitters.
Follow the steps below to pair or delete a transmitter from a receiver.
Step 1: Press and hold the left rotary knob for 3 seconds to enter setting menu.
Step 2: Rotate the rotary knob to find the
“Wireless
Detect” menu
.
Step 3: Follow the menu instruction to pair or delete a transmitter.
Transmitter battery replacement
If the effective distance seems to decrease, it is possible the battery level is low and requires
replacement. In order to replace the battery, undo the three screws on the back of transmitter to
release the cover. Replace with the same type and specification of battery which is 27A 12V
Fluid
Only use Antari FLR/FLG water-based liquid for the M-11
Stage Fogger. The machine is tested and calibrated with this
liquid to get the best output performance. Warranty will be
voided if any other type of liquid is used, improper use of
liquid may lead to machine failure and malfunction.
Service and Maintenance
․
Do not allow the machine to become contaminated.
․
Remove dust from air vents with air compressor, vacuum or a soft brush.
․
Only use a damp cloth to clean the casing.
․
Before storing run distilled water through the system to help prevent condensing the pump or
heater.
․
It is recommended to run the machine on a monthly basis in order to achieve best
performance and output condition.
․
Excessive dust, liquid and dirt built up will degrade performance and cause overheating.
Breaker Reset
Disconnect AC power before resetting the breaker. Only replace fuse with same type
and rating.
